Zoomers Exhaust

	File size just under 10 mb file Click here to download.

Install took just over an hour and that included removing the stock exhaust.

You will need 12mm and 14mm deep well to remove and install.  You will also need to tack weld the exhaust where it fits together, no matter how tight I tightened those clamps, it wouldn't hold together enough.  I think the pipe is too thick to get those clamps to compress it and I used an impact on it.

I unbolted the rear cats from the pipe, took the pipe apart just behind the muffler, then I took the hangers down 3 of them.  The hanger use the 12mm and the pipe connections 14mm.  Putting the Zoomers in is the reverse, just get it all together before you tack weld it.

Hard to tell whether I actually gained any HP or torque (I have since changed my mind on this, specifically when you hit 3000rpm), but I certainly do like the sound that I hear and the sound that I don't hear (No drone while cruising).